fbpx

Cart

Shop banner

Dewalt

Grid List

Showing 1–24 of 143 results

Dewalt DCB184 18V 5.0Ah Battery

Dewalt DCB184 18V 5.0Ah Battery
£62.00 £51.67 Ex VAT

Dewalt DCB184 18V 5.0Ah Battery

Dewalt DCB184 18V 5.0Ah Battery
£62.00 £51.67 Ex VAT

FEATURES:

  • Compatible with all DEWALT XR Li-Ion 18V Tools
  • Protection against overheat, overload and deep discharge conditions increases battery life
  • Excellent electrical characteristics
  • No memory effect

Dewalt DCB115 XR Multi-Voltage Charger 10.8V-18V

Dewalt DCB115 XR Multi-Voltage Charger 10.8V-18V
£19.99 £16.66 Ex VAT

Dewalt DCB115 XR Multi-Voltage Charger 10.8V-18V

Dewalt DCB115 XR Multi-Voltage Charger 10.8V-18V
£19.99 £16.66 Ex VAT

SPECIFICATION

  • Voltage 10.8:14.4V:18V
  • Battery chemistry XR Li-Ion
  • Charging current 4.0 A
  • Charging Time 30 (2.0Ah) min
  • Width 115 mm
  • Height 80 mm
  • Length 150 mm
  • Weight 0.5kg

Dewalt DCN660N 18 Volt XR Brushless Second Fix Nailer (Body Only)

Dewalt DCN660N 18 Volt XR Brushless Second Fix Nailer (Body Only)
£298.99 £249.16 Ex VAT

Dewalt DCN660N 18 Volt XR Brushless Second Fix Nailer (Body Only)

Dewalt DCN660N 18 Volt XR Brushless Second Fix Nailer (Body Only)
£298.99 £249.16 Ex VAT

SPECIFICATION

  • Nail Diameter: 1.6 (16Ga) mm
  • Magazine angle: 20°
  • Magazine loading: Rear
  • Nail Length: 32 – 63 mm
  • Magazine capacity: 110 Nails
  • Trigger Type: Bump & Sequential
  • Length: 310 mm
  • Width: 95 mm
  • Height: 305 mm
  • Nailer Operating Mode: Bump and Sequential
  • Jam Clearing: Tool free
  • Temperature Range: -20 to 50°C
  • Weight: 2.7 kg

Dewalt DCF809D2T XR Brushless Impact Driver 18V 2 x 2.0Ah Li-ion

Dewalt DCF809D2T XR Brushless Impact Driver 18V 2 x 2.0Ah Li-ion
£129.00 £107.50 Ex VAT

Dewalt DCF809D2T XR Brushless Impact Driver 18V 2 x 2.0Ah Li-ion

Dewalt DCF809D2T XR Brushless Impact Driver 18V 2 x 2.0Ah Li-ion
£129.00 £107.50 Ex VAT

What’s in the box

  • 1x DCF809 Impact Driver
  • 2x DCB183 2.0Ah Li-Ion Batteries
  • 1x DCB115 Multi-Voltage Charger
  • 1x Belt Clip
  • 1x TSTAK II Carry Case with Inlay

DEWALT DCF809 FEATURES

  • Super compact at only 130mm in length, allowing you to get into even smaller spaces than most other impact drivers
  • Ultimate portability at less than 1kg (excluding battery weight) with less strain and fatigue on the user
  • Up to 190Nm of max. torque gets the tough applications done
  • Efficient brushless motor delivers high performance, extends tool life and allows for a much shorter tool design
  • Features the ‘Drop and Load’ bit holder for one-handed operation
  • Comes with an optional belt clip
  • Easily adjustable switch electronics for precise screwing

DeWalt DCS334N 18v XR Brushless Jigsaw Body Only

DeWalt DCS334N 18v XR Brushless Jigsaw Body Only
£185.00 £154.17 Ex VAT

DeWalt DCS334N 18v XR Brushless Jigsaw Body Only

DeWalt DCS334N 18v XR Brushless Jigsaw Body Only
£185.00 £154.17 Ex VAT

SPECIFICATION:

  • Strokes No Load: 0-3,200/min.
  • Stroke Length: 26mm
  • Bevel Capacity: 0-45°
  • Capacity: Wood 135mm, Metal 10mm

    + DART WOOD CUTTING JIGSAW BLADE PACK 5 (T101BR)

    Popular range of blades for most applications
    – HCS carbon steel quality for cutting softer materials such as wood, laminated chipboard and plastic.
    – T shaped shank suitable for most popular jigsaws.

  • Weight: 2.1kg

Bare Unit, No Battery or Charger Supplied.

Dewalt DCN692N Cordless XR 2 Speed Framing Nailer 90mm 18V Type 3 (Body Only)

Dewalt DCN692N Cordless XR 2 Speed Framing Nailer 90mm 18V Type 3 (Body Only)
£298.99 £249.16 Ex VAT

Dewalt DCN692N Cordless XR 2 Speed Framing Nailer 90mm 18V Type 3 (Body Only)

Dewalt DCN692N Cordless XR 2 Speed Framing Nailer 90mm 18V Type 3 (Body Only)
£298.99 £249.16 Ex VAT

Input Power: 18 Volt.
Nail Diameter: 2.8-3.3mm.
Nail length: 50-90mm.
Magazine Capacity: up to 55 nails.
Firing mode: Bump and Sequential.
Weight: 4.1kg.

DEWALT DCN692N Cordless XR 2 Speed Framing Nailer

Bare unit, NO battery or charger supplied.

Technical Specs

Input Power: 18 Volt.
Nail Diameter: 2.8-3.3mm.
Nail length: 50-90mm.
Magazine Capacity: up to 55 nails.
Firing mode: Bump and Sequential.
Weight: 4.1kg.

Dewalt DCS355N Oscillating Multi-Tool 18V li-ion Cordless Brushless (Body Only)

Dewalt DCS355N Oscillating Multi-Tool 18V li-ion Cordless Brushless (Body Only)
£109.00 £90.83 Ex VAT

Dewalt DCS355N Oscillating Multi-Tool 18V li-ion Cordless Brushless (Body Only)

Dewalt DCS355N Oscillating Multi-Tool 18V li-ion Cordless Brushless (Body Only)
£109.00 £90.83 Ex VAT

FEATURES:

  • Rubber over mould and ergonomic handle design enable comfortable use over extended periods
  • A standard motor contains carbon brushes which generate friction, Dewalt XR Brushless motor eliminates this wasted energy, maximising the life and runtime of the tool – also delivers up to 57% more run time over brushed motors
  • A bright LED Light illuminates dark work surfaces for accurate cutting
  • Unique quick change accessory system – tool free & single handed operation
  • Universal Accessory Adaptor for use with most oscillating tool accessory brands

Dewalt DCS571N 18v XR Brushless Compact 115mm Circular Saw (BODY ONLY)

Dewalt DCS571N 18v XR Brushless Compact 115mm Circular Saw (BODY ONLY)
£199.99 £166.66 Ex VAT

Dewalt DCS571N 18v XR Brushless Compact 115mm Circular Saw (BODY ONLY)

Dewalt DCS571N 18v XR Brushless Compact 115mm Circular Saw (BODY ONLY)
£199.99 £166.66 Ex VAT

Key Features

  • Brushless motor for extended run-time
  • Maximum 38mm depth of cut
  • 0-45° bevel capacity
  • Keyless bevel angle and depth of cut adjustment
  • Intelligent trigger allowing total control

Body Only / Naked Machine, Not supplied with Batteries or Charger

NEW Dewalt DCW604NT-XJ 18V XR Brushless ¼” Router With Fixed & Plunge Base

NEW Dewalt DCW604NT-XJ 18V XR Brushless ¼” Router With Fixed & Plunge Base
£297.00 £247.50 Ex VAT

NEW Dewalt DCW604NT-XJ 18V XR Brushless ¼” Router With Fixed & Plunge Base

NEW Dewalt DCW604NT-XJ 18V XR Brushless ¼” Router With Fixed & Plunge Base
£297.00 £247.50 Ex VAT

FEATURES:

  • Dual LED lights increase visibility around the router bit during operation for increased accuracy
  • Compact, light weight design that increase ease of use and user comfort
  • Spindle lock makes accessory changing quick and easy
  • Plunge base incorporates fine tune rod for precise depth adjustment
  • Soft start reduces movement of the tool on start up increasing user control
  • Electronic brake for added control & safety
  • Rubber overmould grips make using the unit more comfortable
  • Variable Speed Control to set optimum cutter speed for different materials
Body Only / Naked Machine, Not supplied with Batteries or Charger

NOW AVAILABLE FOR IMMEDIATE DELIVERY

Dewalt 1-70-323 DS400 TOUGHSYSTEM Tool Box

Dewalt 1-70-323 DS400 TOUGHSYSTEM Tool Box
£40.00 £29.99 £24.99 Ex VAT

£40.00 £29.99 £24.99 Ex VATRead more

Dewalt 1-70-323 DS400 TOUGHSYSTEM Tool Box

Dewalt 1-70-323 DS400 TOUGHSYSTEM Tool Box
£40.00 £29.99 £24.99 Ex VAT

FEATURES:

  • Engineered plastic side clips allows stackability with other boxes
  • When carrying the toolboxes by hand, they can also be fastened together, allowing them to be carried as a stack
  • Heavy duty metal latches and hinges for added durability
  • Bi-material comfortable top handle is easy to grip
  • Locking side handles offer alternative lifting and easier manoeuvrability
  • Durable 4mm PP structural foam plastic for high impact protection
  • IP65 – Dust tight and water jet resistant due to high performance seal in the lid
  • A pressure relief valve enables equalisation of the pressure inside and outside the unit
  • Padlock eyes provide lockable security

TOTE TRAY AND TOOLS  NOT INCLUDED

£40.00 £29.99 £24.99 Ex VATRead more

Dewalt DCH273N Brushless XR 3 Mode SDS+ Hammer Drill 18v (BODY ONLY)

Dewalt DCH273N Brushless XR 3 Mode SDS+ Hammer Drill 18v (BODY ONLY)
£225.00 £187.50 Ex VAT

Dewalt DCH273N Brushless XR 3 Mode SDS+ Hammer Drill 18v (BODY ONLY)

Dewalt DCH273N Brushless XR 3 Mode SDS+ Hammer Drill 18v (BODY ONLY)
£225.00 £187.50 Ex VAT

FEATURES:

  • Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
  • Brushless motor with high capacity XR 5.0Ah 18V Lithium-ion battery platform for extreme runtime and reduced maintenance
  • Electronic clutch for consistently-high torque and improved durability
  • Perform & Protect: best-in-class vibration at 6.6m/s_, minimising user fatigue
  • Bright white LED with delay feature improves visibility

Dewalt DWST1-71195 TStak VI Tool Storage Box 23 Litres

Dewalt DWST1-71195 TStak VI Tool Storage Box 23 Litres
£30.00 £25.00 Ex VAT

Dewalt DWST1-71195 TStak VI Tool Storage Box 23 Litres

Dewalt DWST1-71195 TStak VI Tool Storage Box 23 Litres
£30.00 £25.00 Ex VAT

FEATURES:

  • 23L large volume unit for storing larger hand tools and power tools
  • Side latches allow connectivity for easy carrying and safe stacking
  • Built-In wide handle for easy and stable portability
  • Strong & tough metal latches and metal hinges for heavy duty use

Dewalt DCE530N XR Cordless Heat Gun 18V (Body Only)

Dewalt DCE530N XR Cordless Heat Gun 18V (Body Only)
£88.99 £74.16 Ex VAT

Dewalt DCE530N XR Cordless Heat Gun 18V (Body Only)

Dewalt DCE530N XR Cordless Heat Gun 18V (Body Only)
£88.99 £74.16 Ex VAT

FEATURES:

  • Reaches a temperature of 530°C on a high setting and 290°C on a low setting
  • Select a high or low-temperature setting with the 2-set temperature selector, optimising temperature for specific applications
  • Keep the tool switched on using the lock-on button to improve comfort for longer applications and hands-free use
  • The trigger with a built-in lock-off switch prevents an accidental start-up during transportation and storage, reducing risk of thermal accidents
  • A built-in LED light illuminates the workplace and improves visibility in small, confined spaces
  • Fully compatible with all DEWALT 18V XR batteries

COMES WITH:

  • Reflector applicator nozzle
  • Surface applicator nozzle
Body Only / Naked Machine, Not supplied with Batteries or Charger

Dewalt DCW210N 18V XR 125mm Random Orbit Sander (Body Only)

Dewalt DCW210N 18V XR 125mm Random Orbit Sander (Body Only)
£139.00 £115.83 Ex VAT

Dewalt DCW210N 18V XR 125mm Random Orbit Sander (Body Only)

Dewalt DCW210N 18V XR 125mm Random Orbit Sander (Body Only)
£139.00 £115.83 Ex VAT

FEATURES:

  • Cordless technology for more user freedom
  • Brushless Motor Technology for excellent efficiency
  • Variable speed dial allows you to match the speed to the material
  • Low vibration allowing for extended usage without fatigue
  • Built-in dust extraction port allowing direct connection to the dust extractor, or DEWALT AirLock system
  • Textured anti-slip top and body grip provides ultimate comfort and control during use
  • The dust-sealed switch prevents contamination

Dewalt DCD796N Combi Drill 18 Volt XR Brushless Compact Lithium-Ion (Body Only)

Dewalt DCD796N Combi Drill 18 Volt XR Brushless Compact Lithium-Ion (Body Only)
£71.99 £59.99 Ex VAT

Dewalt DCD796N Combi Drill 18 Volt XR Brushless Compact Lithium-Ion (Body Only)

Dewalt DCD796N Combi Drill 18 Volt XR Brushless Compact Lithium-Ion (Body Only)
£71.99 £59.99 Ex VAT

FEATURES:

  • 18V XR Li-Ion compact hammer drill driver
  • Brushless Motor Technology for excellent efficiency
  • Ultra compact, lightweight design allows use in confined spaces
  • Two speed all metal transmission for increased runtime and longer tool life
  • Drill Driver and Hammer feature for multiple applications
  • 15 position adjustable torque control for consistent screw driving into a variety of materials
  • Intelligent trigger design allows for total control of application
  • Improved ergonomic design with rubber grip over mould improving users comfort
  • Improved air flow to the motor for cooler electronics and incrreased power
  • 3 position super bright LED light
  • – SET 1 = LOW LIGHT LED on for 20s – 2.6 Lumens
  • – SET 2 = MEDIUM LIGHT LED on for 20s – 18 Lumens
  • – SET 3 = HIGH LIGHT LED on for 20min – 60 Lumens
  • Li-Ion battery packs allows for superior insertion and removal with state of charge indicator
  • Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster

DeWalt DCF887N 18v XR Brushless 3 Speed Impact Driver Body Only

DeWalt DCF887N 18v XR Brushless 3 Speed Impact Driver Body Only
£91.00 £75.83 Ex VAT

DeWalt DCF887N 18v XR Brushless 3 Speed Impact Driver Body Only

DeWalt DCF887N 18v XR Brushless 3 Speed Impact Driver Body Only
£91.00 £75.83 Ex VAT
Specification:
  • Voltage – 18 V
  • Max Torque – 205Nm
  • Power Output – 280 Watt
  • No Load Speed – 0 – 3250 rpm
  • Max. Bolt Diameter – M12
  • Bit Holder – 1/4″ (6.35mm)
  • Length – 135 mm
  • Height – 196 mm

Dewalt DCK2110L2T 12V XR Sub Compact Twin Pack

Dewalt DCK2110L2T 12V XR Sub Compact Twin Pack
£214.00 £180.00 £150.00 Ex VAT

£214.00 £180.00 £150.00 Ex VATRead more

Dewalt DCK2110L2T 12V XR Sub Compact Twin Pack

Dewalt DCK2110L2T 12V XR Sub Compact Twin Pack
£214.00 £180.00 £150.00 Ex VAT

DCD701 FEATURES:

  • Ultimate portability and ease of use
  • 15 position adjustable torque control for consistent screw driving into a variety of materials
  • 10 mm single sleeve keyless chuck with automatic spindle lock for quick and easy bit change
  • 12 Volt tools and batteries are 100 percent compatible with your existing 10.8 volt products
  • New state of charge battery pack allows users to quickly check battery level
  • Efficient brushless motor gives 15 percent more runtime than previous generation
  • 38.5 mm shorter than previous generation
  • Bright LED light on tool foot for high visibility in low light situations

DCF801 FEATURES:

  • Efficient brushless motor gives 15 percent more runtime than previous generation
  • 12 Volt tools and batteries are 100 percent compatible with your existing 10.8 volt products
  • New state of charge battery pack allows users to quickly check battery level
  • 3 bright LED lights on tool head for high visibility in low light situations

COMES WITH:

  • 2 x Belt Hooks
  • 2 x DCB124 3.0Ah Batteries
  • DCB112 Fast Charger
  • TSTAK Case

£214.00 £180.00 £150.00 Ex VATRead more

Dewalt DCB104 18V XR 4 Port Simultaneous Fast Charger 240V

Dewalt DCB104 18V XR 4 Port Simultaneous Fast Charger 240V
£204.00 £170.00 Ex VAT

Dewalt DCB104 18V XR 4 Port Simultaneous Fast Charger 240V

Dewalt DCB104 18V XR 4 Port Simultaneous Fast Charger 240V
£204.00 £170.00 Ex VAT

Features:

  • Simultaneously fast charges all 4 ports at the same time for fast, efficient charging and reduces outlet space
  • 4 x 8A output per port
  • Charges 4 x 9Ah XR Flexvolt batteries in 75 minutes and 4 x 12Ah in 100 minutes
  • Cord wrap facility around the unit for easy and safe cord storage
  • Side brackets to mount onto ToughSystem storage kit boxes for ease of storage and portability
  • Mounting point for ToolConnect Tag (not included) for inventory management via ToolConnect App
  • Screw mounts to easily hang and store

Dewalt DCD996NT 18V XR li-ion Premium 3-Speed XRP Combi Drill (Body Only) + Tstak Kitbox

Dewalt DCD996NT 18V XR li-ion Premium 3-Speed XRP Combi Drill (Body Only) + Tstak Kitbox
£120.00 £113.50 £94.58 Ex VAT

£120.00 £113.50 £94.58 Ex VATRead more

Dewalt DCD996NT 18V XR li-ion Premium 3-Speed XRP Combi Drill (Body Only) + Tstak Kitbox

Dewalt DCD996NT 18V XR li-ion Premium 3-Speed XRP Combi Drill (Body Only) + Tstak Kitbox
£120.00 £113.50 £94.58 Ex VAT

Features:

  • All metal nitro-carburized chuck prolongs life as it is stronger and rust resitant
  • Carbide inserts improve bit gripping strength and helps to minimise dropped bit frustrations
  • 3 speed gearbox for a greater range of applications
  • Larger brushless motor than previous model gives 34% increase in power
  • Improved air flow to the motor
  • Hammer Function increases speed to 2250rpm – Increased productivity
  • Super bright LED with 3 LEDs which give a range from 2.6 to a massive 60 lumens

Comes With:

  • Side handle
  • Belt clip
  • Tstak Carry Case

£120.00 £113.50 £94.58 Ex VATRead more

Dewalt DCW200N-XJ 18v XR Brushless 1/4 Sheet Orbital Sander (BODY ONLY)

Dewalt DCW200N-XJ 18v XR Brushless 1/4 Sheet Orbital Sander (BODY ONLY)
£139.00 £115.83 Ex VAT

Dewalt DCW200N-XJ 18v XR Brushless 1/4 Sheet Orbital Sander (BODY ONLY)

Dewalt DCW200N-XJ 18v XR Brushless 1/4 Sheet Orbital Sander (BODY ONLY)
£139.00 £115.83 Ex VAT

Features

  • Cordless technology for more user freedom
  • Brushless motor offering superb runtime and durability
  • Dust port connects directly to DEWALT‘s Airlock System forming a secure, locking connection between tool and dust extractor [cs], or std. 35mm connector
  • Wireless Tool Control allows cord free connectivity to WTC-equipped DEWALT dust extractors
  • Textured anti-slip top and body grip provides ultimate comfort and control during use
  • Dust sealed switch for added durabilty
  • Dust sealed bearings for prolonged product life
  • Dual plane counter-balance low-vibration design reduces user fatigue
  • Paper clamps provided for conventional abrasives
  • Hook & loop platen allows faster paper change, better dust extraction and increase sanding efficiency

Supplied With

  • Paper punch
  • Fabric dust bag with built-in extractor ports

Rhino Hook

Rhino Hook
£17.99 £14.99 Ex VAT

The Rhino Hook. The next generation in cordless drill holstering.
Made to stand up to the toughest tests you can throw at it.

The next generation in cordless drill holstering. The result is The Rhino Hook!

Dewalt DCK264P2 18V XR Nailer Twinpack in Tough Box (2 x 5.0Ah Batteries)

Dewalt DCK264P2 18V XR Nailer Twinpack in Tough Box (2 x 5.0Ah Batteries)
£720.00 £699.00 £582.50 Ex VAT

£720.00 £699.00 £582.50 Ex VATRead more

Dewalt DCK264P2 18V XR Nailer Twinpack in Tough Box (2 x 5.0Ah Batteries)

Dewalt DCK264P2 18V XR Nailer Twinpack in Tough Box (2 x 5.0Ah Batteries)
£720.00 £699.00 £582.50 Ex VAT

DCN692 FRAMING NAILER FEATURES:

  • The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
  • Mechanical rather than gas operation offers consistant performance at temperature between -20 and 50 degrees celcius and minimal cleaning/service requirements
  • Class leading vibration and sound figures, offer fantastic user protection
  • Versatile 30 – 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
  • Reversable belt/rafter hook povides increased portability and versatility on the job-site
  • Depths can be easily adjusted using the thumb wheel depth adjuster
  • Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
  • Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
  • Gas free operation offers a significant saving in running costs
  • Tool free stall/jam clearance minimises user down time
  • Cordless design so no hanging leads to deal with
  • User can engage contact trip lock-off and prevent accidental dis-charge of fastener
  • Dry fire lockout ensures that the tool is protected from firing without nails in the magazine

DCN660 FINISHING (2ND FIX) NAILER FEATURES:

  • Benefit from longer runtime, quicker readiness to fire and less recoil
  • Brushless motor technology offers the power to fire a 63mm nail into soft wood and 50mm nail into hard wood
  • Tool free stall/jam clearance minimises user down time
  • Mechanical rather than gas operation offers significant cost savings as well as consistent performance at temperatures between -20 and 50 degrees celcius and minimal cleaning /service requirements
  • Protective pads to lay tool down on head
  • Durable magazine accepts 32 to 63mm 16Ga nails
  • Mode selector allows for bump or sequential nailing
  • LED lights with error notification
  • Easy tool-free clearing of jams and stall release
  • Easy depth adjustment with easy to read gauge

COMES WITH:

  • Belt hook (reversible) on 1st fix nailer
  • No mark tip x 2 for 1st fix nailer
  • 2 x 5Ah Batteries (DCB184)

£720.00 £699.00 £582.50 Ex VATRead more

Dewalt DWST1-70703 TStak II Tool Storage Box

Dewalt DWST1-70703 TStak II Tool Storage Box
£24.00 £20.00 Ex VAT

Dewalt DWST1-70703 TStak II Tool Storage Box

Dewalt DWST1-70703 TStak II Tool Storage Box
£24.00 £20.00 Ex VAT

FEATURES:

  • 13.5L Powertool storage top unit
  • Complete with adaptable foam insert to keep powertools protected against shock
  • Fitted with padlock eyes to keep tools safe and secure.
  • Rugged and hardwearing metal latches improve durability
  • Label windows for improved organisation
  • Connecting units is quick and easy with the simple interlocking system
  • NO TRAY OR FOAM INCLUDED

Dewalt DCS570N 18V XR Brushless Circular Saw 184mm (Body Only)

Dewalt DCS570N 18V XR Brushless Circular Saw 184mm (Body Only)
£175.00 £145.83 Ex VAT

Dewalt DCS570N 18V XR Brushless Circular Saw 184mm (Body Only)

Dewalt DCS570N 18V XR Brushless Circular Saw 184mm (Body Only)
£175.00 £145.83 Ex VAT

Features:

  • Scale for precise cutting depth setting to 65 mm
  • General-purpose ripping, cross-cutting and bevelling circular saw for wood and other construction materials
  • High torque Brushless motor for durability and power for cutting job site and joinery materials
  • Stable block construction for low vibration running and long service life
  • Additional handle for safe two-handed work
  • Variable adjustment of the bevel angle to 57 degrees

Comes With:

  • Precision 24 tooth saw blade
  • Rip Fence
  • Blade Spanner
  • Dust Extraction Spout